|
◆240 * 64 Graphic LCD display,
user-friendly interface , easy
operation.
◆Chinese and English interface, meeting
the different needs of different
users
◆Test mode can be set
arbitrarily.
◆Constant voltage output regulation
range of the output voltage is within ± 1%; which guarantees
the output voltage will not vary with the power supply and
external load. Measurement is
accurate.
◆Fast discharge function The tester can
discharge the DUT and the circuit quickly within 0.2s after DCW and
IR test finishing; which ensures safety of
operators.
◆DCW test with Open-circuit detection
Preventing misjudge when test lead is
off-line.
◆ With the OSC
function.
◆Over-zero start Preventing damage of
DUT.
◆ Voltage rise as time, looking for the
breakdown
points.
◆Set the current high-limit and low-limit
alarm, to prevent misjudge when test lead is
off-line.
◆Set offset
value.
◆ During the testing, users can change the
output voltage
manually.
◆The tester is with real current measurement
function.
◆ ARC
function.
◆With GFI
protection.
◆Pre-set and save the test parameters 30
groups and 99
steps.
◆Keyboard lock, to avoid the test parameters
are modified by the
operator.
◆Front panel software
calibration.
◆ PLC interface is standard, optional RS232C,
RS485, USB, GPIB interfaces.
◆ Electricity safety wall system, to protect the safety of users,
DUT and testing
equipment.
◆ DDS plus linear power amplifier to drive
standard sine waveform, to make the pure output voltage waveform
distortion is less than
2%.
◆ Rapid voltage build
time
(1)AC output voltage building time is
120ms, and DC output voltage building time is
60ms.
 
◆Set the voltage rise time, test time, fall
time and interval time
.
◆PLC interface can output either 24V level or
contact
signal
|
